This site is intended for healthcare professionals
FDA Hero  Banner - Multi-coloured pills and tablets
FDA Drug information

POTASSIUM CHLORIDE

Read time: 2 mins
Marketing start date: 05 May 2024

Summary of product characteristics


Adverse Reactions

ADVERSE REACTIONS Reactions which may occur because of the potassium-containing solutions or the technique of administration include febrile response, infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection or extravasation, hypervolemia, and hyperkalemia. To rapid infusion of hypertonic solutions may cause local pain and, rarely, vein irritation. Rate of administration should be adjusted according to tolerance. Reactions reported with the use of potassium-containing solutions include nausea, vomiting, abdominal pain and diarrhea. The signs and symptoms of potassium intoxication include paresthesias of the extremities, areflexia, muscular or respiratory paralysis, mental confusion, weakness, hypotension, cardiac arrhythmias, heart block, electrocardiographic abnormalities and cardiac arrest. Potassium deficits result in disruption of neuromuscular function, and intestinal ileus and dilatation. If infused in large amounts, chloride ions may cause a loss of bicarbonate ions, resulting in an acidifying effect. Potassium-containing solutions are intrinsically irritating to tissues. Therefore, extreme care should be taken to avoid perivascular infiltration. Local tissue necrosis and subsequent sloughing may result if extravasation occurs. Chemical phlebitis and venospasm have also been reported. If an adverse reaction does occur, discontinue the infusion, evaluate the patient, institute appropriate therapeutic countermeasures and save the remainder of the fluid for examination if deemed necessary.

Contraindications

CONTRAINDICATIONS Potassium Chloride for Injection Concentrate USP is contraindicated in diseases where high potassium levels may be encountered, in patients with hyperkalemia, renal failure and in conditions in which potassium retention is present, or where additives of potassium and chloride could be clinically detrimental.

Dosage And Administration

DOSAGE AND ADMINISTRATION Not for direct patient injection. Potassium Chloride for Injection Concentrate USP, Pharmacy Bulk Package is for preparation of intravenous admixtures only and must be diluted before administration. Care must be taken to ensure there is complete mixing of the potassium chloride with the large volume fluid, particularly if soft or bag type containers are used. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. Dosage and rate of administration are to be directed by the physician and are dependent upon the specific conditions of each patient (e.g., age, weight, clinical condition of the patient and laboratory determinations). Frequent laboratory determinations and clinical evaluation are essential to monitor changes in electrolyte concentrations, and fluid and electrolyte balance during prolonged parenteral therapy. If the serum potassium level is greater than 2.5 mEq/liter, potassium can be given at a rate not to exceed 10 mEq/hour and in a concentration of up to 40 mEq/liter. The 24 hour total dose should not exceed 200 mEq. If urgent treatment is indicated (serum potassium level less than 2.0 mEq/liter and electrocardiographic changes and/or muscle paralysis), potassium chloride may be infused very cautiously at a rate of up to 40 mEq/hour. In such cases, continuous cardiac monitoring is essential. As much as 400 mEq may be administered in a 24 hour period. In critical conditions, potassium chloride may be administered in saline (unless contraindicated) rather than in dextrose containing fluids, as dextrose may lower serum potassium levels. Directions for Use of Pharmacy Bulk Packages in EXCEL® Container with Blocked Medication Port Warning: Not for direct infusion. For preparation of admixtures for intravenous infusion. The Pharmacy Bulk Package is for use in a Pharmacy Admixture Service only. Use of this product is restricted to a suitable work area, such as a laminar flow hood (or an equivalent clean air compounding area). Additives should not be made to Pharmacy Bulk Packages. Caution : Do not use plastic containers in series connection. To Open Tear overwrap down at notch and remove solution container. Check for minute leaks by squeezing solution container firmly. If leaks are found, discard solution as sterility may be impaired. NOTE: Before use, perform the following checks: Inspect each container. Read the label. Ensure solution is the one ordered and is within the expiration date. Invert container and carefully inspect the solution in good light for cloudiness, haze, or particulate matter. Any container which is suspect should not be used. Use only if solution is clear and container and seals are intact. Preparation for Admixing 1. Remove plastic protector from sterile set port at bottom of container. 2. Attach suitable transfer device or compounding set. Refer to complete directions accompanying device. Do Not Add Medication Transfer individual dose(s) to appropriate intravenous infusion solutions. Use of a syringe with needle is not recommended. Multiple entries increase the potential of microbial and particulate contamination. The container closure may be penetrated only one time, utilizing a suitable sterile dispensing set which allows measured dispensing of the contents. For Pharmacy Bulk Packages: The Pharmacy Bulk Package is to be used only in a suitable work area such as a laminar air flow hood (or an equivalent clean air compounding area). For compounding only. Do not use for direct infusion. Do not use/penetrate blocked port. Attach suitable transfer device or compounding set. Refer to complete directions accompanying device. Hang container on suitable fixture. Once container closure has been penetrated, withdrawal of contents should be completed within 4 hours. Discard any unused portion. Important Admixing Instructions The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. Additives may be incompatible with the fluid withdrawn from this container. Consult with pharmacist. When compounding admixtures, use aseptic technique, mix thoroughly and discard unused portion. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration (See Warnings and Precautions, General).

Indications And Usage

INDICATIONS AND USAGE Potassium Chloride for Injection Concentrate USP is indicated in the treatment of potassium deficiency states when oral replacement is not feasible. This is a concentrated solution which is intended for use in a pharmacy admixture service and is restricted to the preparation of admixtures for intravenous infusion.

Warnings

WARNINGS Strongly Hypertonic Solution. Must be properly diluted and thoroughly mixed before injection. Potentially Fatal Cardiac Adverse Reactions with Undiluted Intravenous Administration Direct patient injection of potassium chloride at this concentration may be instantaneously fatal. Potassium Chloride for Injection Concentrate must be diluted before administration. Fatal cardiac arrhythmia and cardiac arrest have occurred when potassium chloride was administered in an undiluted form. To avoid potassium intoxication, do not infuse these solutions rapidly. In patients with renal insufficiency, administration of potassium chloride may cause potassium intoxication and life-threatening hyperkalemia. The administration of intravenous solutions can cause fluid and/or solute overload resulting in dilution of serum electrolyte concentrations, overhydration, congested states or pulmonary edema. The risk of dilutional states is inversely proportional to the electrolyte concentration. The risk of solute overload causing congested states with peripheral and pulmonary edema is directly proportional to the electrolyte concentration. In patients with diminished renal function, administration of solutions containing potassium ions may result in potassium retention. This product contains aluminum that may be toxic. Aluminum may reach toxic levels with prolonged parenteral administration if kidney function is impaired. Premature neonates are particularly at risk because their kidneys are immature, and they require large amounts of calcium and phosphate solutions, which contain aluminum. Research indicates that patients with impaired kidney function, including premature neonates, who receive parenteral levels of aluminum at greater than 4 to 5 mcg/kg/day accumulate aluminum at levels associated with central nervous system and bone toxicity. Tissue loading may occur at even lower rates of administration. The drug product contains no more than 25 mcg/L of aluminum.

Overdosage

OVERDOSAGE In the event of fluid overload during parenteral therapy, reevaluate the patient's condition and institute appropriate corrective treatment. In the event of overdosage with potassium-containing solutions, discontinue the infusion immediately and institute corrective therapy to reduce serum potassium levels. Treatment of hyperkalemia includes the following: Dextrose Injection USP, 10% or 25%, containing 10 units of crystalline insulin per 20 grams of dextrose administered intravenously, 300 to 500 mL per hour. Absorption and exchange of potassium using sodium or ammonium cycle cation exchange resin, orally and as retention enema. Hemodialysis and peritoneal dialysis. The use of potassium-containing foods or medications must be eliminated. However, in cases of digitalization, too rapid a lowering of plasma potassium concentration can cause digitalis toxicity.

Clinical Pharmacology

CLINICAL PHARMACOLOGY Potassium is the chief cation of body cells (160 mEq/liter of intracellular water) and is concerned with the maintenance of body fluid composition and electrolyte balance. Potassium participates in carbohydrate utilization and protein synthesis, and is critical in the regulation of nerve conduction and muscle contraction, particularly in the heart. Chloride, the major extracellular anion, closely follows the metabolism of sodium and changes in the acid-base balance of the body are reflected by changes in the chloride concentration. Normally about 80 to 90% of the potassium intake is excreted in the urine, the remainder in the stools and to a small extent, in the perspiration. The kidney does not conserve potassium well so that during fasting, or in patients on a potassium-free diet, potassium loss from the body continues resulting in potassium depletion. A deficiency of either potassium or chloride will lead to a deficit of the other.

Effective Time

20220221

Version

10

Spl Product Data Elements

POTASSIUM CHLORIDE POTASSIUM CHLORIDE POTASSIUM CHLORIDE POTASSIUM CATION CHLORIDE ION WATER

Application Number

ANDA085870

Brand Name

POTASSIUM CHLORIDE

Generic Name

POTASSIUM CHLORIDE

Product Ndc

0264-1944

Product Type

HUMAN PRESCRIPTION DRUG

Route

PARENTERAL

Package Label Principal Display Panel

PRINCIPAL DISPLAY PANEL - 250 mL Excel® Container Label Fatal If Given By Direct Infusion Potassium Chloride for Injection Concentrate USP 500 mEq/250 mL (2 mEq/mL) WARNING: Pharmacy Bulk Package Not for Direct Infusion Concentrated solution: MUST BE DILUTED For preparation of intravenous admixtures only. Y94-003-477 LD-709-2 NDC 0264-1944-20 250 mL Each 100 mL contains: Potassium Chloride USP 14.9 g; Water for Injection USP qs; 4000 mOsmol/liter; Electrolytes (mEq/mL): Potassium 2; Chloride 2 Pharmacy Bulk Package. Sterile, nonpyrogenic. No antimicrobial or bacteriostatic agent has been added. Contains no more than 25 mcg/L of aluminum. Store at 20°-25°C. [See USP Controlled Room Temperature.] Avoid excessive heat (40°C/104°F). Protect from freezing. Dosage and Directions for Use: See Prescribing Information. Do not remove overwrap until ready for use. Withdraw contents within 4 hours of initial puncture. Use aseptic technique. Not made with natural rubber latex, PVC or DEHP. Affix accompanying label for date and time of expiry Expiration date: __ / __ / ____ Expiration time: ___________ AM/PM Discard ___ hours after initial entry Y37-002-586 LD-736-2 REF P9402 Rx only B. Braun Medical Inc. Bethlehem, PA 18018-3524 USA 1-800-227-2862 Y94-003-476 LD-708-2 EXP LOT Container Label Container Label

Spl Unclassified Section

Y36-003-064 LD-710-2 Prescribing Information EXCEL ® CONTAINER Potassium Chloride for Injection Concentrate USP 500 mEq/250 mL (2 mEq/mL) PHARMACY BULK PACKAGE NOT FOR DIRECT INFUSION FOR INTRAVENOUS INFUSION ONLY MUST BE DILUTED PRIOR TO INJECTION Rx only

Spl Unclassified Section Table

Ingredient Molecular Formula Molecular Weight
Potassium Chloride USP KCl 74.55

Pregnancy

Pregnancy: (I) Teratogenic effects. Animal reproduction studies have not been conducted with potassium chloride injection. It is also not known whether potassium chloride injection can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. Potassium chloride injection should be given to a pregnant woman only if clearly needed.

Teratogenic Effects

Animal reproduction studies have not been conducted with potassium chloride injection. It is also not known whether potassium chloride injection can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. Potassium chloride injection should be given to a pregnant woman only if clearly needed.

How Supplied

HOW SUPPLIED Potassium Chloride for Injection Concentrate USP 500 mEq/250 mL (2 mEq/mL) is supplied sterile and nonpyrogenic in 250 mL Excel ® container with clear overwrap, Pharmacy Bulk Packages, packaged 24 per case. NDC REF Size Potassium Chloride for Injection Concentrate USP 0264-1944-20 P9402 250 mL Exposure of pharmaceutical products to heat should be minimized. Store at 20° to 25°C (68° to 77°F). Avoid excessive heat (40°C/104°F). Protect from freezing. Excursions permitted 15° to 30°C (59° to 86°F). [See USP Controlled Room Temperature.]

How Supplied Table

NDC REF Size
Potassium Chloride for Injection Concentrate USP
0264-1944-20 P9402 250 mL

Storage And Handling

Exposure of pharmaceutical products to heat should be minimized. Store at 20° to 25°C (68° to 77°F). Avoid excessive heat (40°C/104°F). Protect from freezing. Excursions permitted 15° to 30°C (59° to 86°F). [See USP Controlled Room Temperature.]

General Precautions

General Clinical evaluation and periodic laboratory determinations are necessary to monitor changes in fluid balance, electrolyte concentrations, and acid-base balance during prolonged parenteral therapy or whenever the condition of the patient warrants such evaluation. Significant deviations from normal concentrations may require the use of additional electrolyte supplements, or the use of electrolyte-free dextrose solutions to which individualized electrolyte supplements may be added. Potassium therapy should be guided primarily by serial electrocardiograms, especially in patients receiving digitalis. Serum potassium levels are not necessarily indicative of tissue potassium levels. Solutions containing potassium should be used with caution in the presence of cardiac disease, particularly in the presence of renal disease, and in such instances, cardiac monitoring is recommended. Solutions containing potassium in a greater concentration than 40 mEq/liter may result in significant irritation to peripheral or central veins. For peripheral administration of solutions containing potassium, slowly infuse the solution through a small bore needle, placed well within the lumen of a large vein. Carefully avoid infiltration. Solutions containing dextrose should be used with caution in patients with overt or known subclinical diabetes mellitus, or carbohydrate intolerance for any reason. If the administration is controlled by a pumping device, care must be taken to discontinue pumping action before the container runs dry or air embolism may result. To minimize the risk of possible incompatibilities arising from mixing this solution with other additives that may be prescribed, the final infusate should be inspected for cloudiness or precipitation immediately after mixing, prior to administration, and periodically during administration. Use only if solution is clear and container and seals are intact. Discard container within 4 hours after initial puncture.

Precautions

PRECAUTIONS General Clinical evaluation and periodic laboratory determinations are necessary to monitor changes in fluid balance, electrolyte concentrations, and acid-base balance during prolonged parenteral therapy or whenever the condition of the patient warrants such evaluation. Significant deviations from normal concentrations may require the use of additional electrolyte supplements, or the use of electrolyte-free dextrose solutions to which individualized electrolyte supplements may be added. Potassium therapy should be guided primarily by serial electrocardiograms, especially in patients receiving digitalis. Serum potassium levels are not necessarily indicative of tissue potassium levels. Solutions containing potassium should be used with caution in the presence of cardiac disease, particularly in the presence of renal disease, and in such instances, cardiac monitoring is recommended. Solutions containing potassium in a greater concentration than 40 mEq/liter may result in significant irritation to peripheral or central veins. For peripheral administration of solutions containing potassium, slowly infuse the solution through a small bore needle, placed well within the lumen of a large vein. Carefully avoid infiltration. Solutions containing dextrose should be used with caution in patients with overt or known subclinical diabetes mellitus, or carbohydrate intolerance for any reason. If the administration is controlled by a pumping device, care must be taken to discontinue pumping action before the container runs dry or air embolism may result. To minimize the risk of possible incompatibilities arising from mixing this solution with other additives that may be prescribed, the final infusate should be inspected for cloudiness or precipitation immediately after mixing, prior to administration, and periodically during administration. Use only if solution is clear and container and seals are intact. Discard container within 4 hours after initial puncture. Pregnancy: (I) Teratogenic effects. Animal reproduction studies have not been conducted with potassium chloride injection. It is also not known whether potassium chloride injection can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. Potassium chloride injection should be given to a pregnant woman only if clearly needed.

Learning Zones

The Learning Zones are an educational resource for healthcare professionals that provide medical information on the epidemiology, pathophysiology and burden of disease, as well as diagnostic techniques and treatment regimens.

Disclaimer

The drug Prescribing Information (PI), including indications, contra-indications, interactions, etc, has been developed using the U.S. Food & Drug Administration (FDA) as a source (www.fda.gov).

Medthority offers the whole library of PI documents from the FDA. Medthority will not be held liable for explicit or implicit errors, or missing data.

Drugs appearing in this section are approved by the FDA. For regions outside of the United States, this content is for informational purposes only and may not be aligned with local regulatory approvals or guidance.