This site is intended for healthcare professionals
FDA Hero  Banner - Multi-coloured pills and tablets
FDA Drug information

Intralipid

Read time: 3 mins
Marketing start date: 28 Apr 2024

Summary of product characteristics


Adverse Reactions

ADVERSE REACTIONS The adverse reactions observed can be separated into two classes: Those more frequently encountered are due either to a) contamination of the intravenous catheter and result in sepsis, or to b) vein irritation by concurrently infused hypertonic solutions and may result in thrombophlebitis. These adverse reactions are inseparable from the hyperalimentation procedure with or without Intralipid. Less frequent reactions more directly related to Intralipid are: a) immediate or early adverse reactions, each of which has been reported to occur in clinical trials, in an incidence of less than 1%; dyspnea, cyanosis, allergic reactions, hyperlipemia, hypercoagulability, nausea, vomiting, headache, flushing, increase in temperature, sweating, sleepiness, pain in the chest and back, slight pressure over the eyes, dizziness, and irritation at the site of infusion, and, rarely, thrombocytopenia in neonates; b) delayed adverse reactions such as hepatomegaly, jaundice due to central lobular cholestasis, splenomegaly, thrombocytopenia, leukopenia, transient increases in liver tests, and overloading syndrome (focal seizures, fever, leukocytosis, hepatomegaly, splenomegaly and shock). The deposition of a brown pigmentation in the reticuloendothelial system, the so-called “intravenous fat pigment,” has been reported in patients infused with Intralipid . The causes and significance of this phenomenon are unknown.

Contraindications

CONTRAINDICATIONS Intralipid is contraindicated in patients with: Disturbances of normal fat metabolism such as pathologic hyperlipemia, lipoid nephrosis or acute pancreatitis if accompanied by hyperlipidemia. Known hypersensitivity to egg, soybean, peanut protein, or to any of the active ingredients or excipients in Intralipid 20%. INTRALIPID 20% PHARMACY BULK PACKAGE IS NOT INTENDED FOR DIRECT INTRAVENOUS ADMINISTRATION. DILUTING INTRALIPID 20% TO A 10% CONCENTRATION WITH INTRAVENOUS FLUID SUCH AS NORMAL SALINE OR OTHER DILUENTS DOES NOT PRODUCE A DILLITION THAT IS EQUIVALENT IN COMPOSITION TO INTRALIPID 10% I.V. FAT EMULSION, AND SUCH A DILUTION SHOULD NOT BE GIVEN BY DIRECT INTRAVENOUS ADMINISTRATION.

Description

DESCRIPTION Intralipid ® 20% (A 20% I.V. Fat Emulsion) is a sterile, non-pyrogenic fat emulsion intended as a source of calories and essential fatty acids for use in a pharmacy admixture program. It is made up of 20% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. Intralipid 20% Pharmacy Bulk Package is not intended for direct infusion. It is a sterile dosage form which contains several single doses for use in preparation of three-in-one or total nutrient admixtures (TNAs) in a pharmacy admixture program. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure: Where are saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%) 1 . These fatty acids have the following chemical and structural formulas: Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure: contain saturated and unsaturated fatty acids that abound in neutral fats. R 3 is primarily either the choline or the ethanolamine ester of phosphoric acid. Glycerin is chemically designated C 3 H 8 O 3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula: Intralipid 20% (A 20% I.V. Fat Emulsion) has an osmolality of approximately 350 mOsmol/kg water (which represents 260 mOsmol/L of emulsion) and contains emulsified fat particles of approximately 0.5 micron size. The total caloric value, including fat, phospholipid and glycerin, is 2.0 kcal per mL of Intralipid 20%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (Biofine TM ) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate) or PVC. This product is not made with natural rubber latex. The container is nontoxic and biologically inert. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Figure Figure Figure Figure Figure Figure Figure

Dosage And Administration

DOSAGE AND ADMINISTRATION Intralipid 20% (A 20% I.V. Fat Emulsion) Pharmacy Bulk Package should be administered only as a part of a three-in-one or total nutrient admixture via peripheral vein or by central venous infusion. Directions For Proper Use of Pharmacy Bulk Package. INTRALIPID 20% PHARMACY BULK PACKAGE IS NOT INTENDED FOR DIRECT INFUSION. The container closure may be penetrated only once using a suitable sterile transfer device or dispensing set which allows measured dispensing of the contents. The Pharmacy Bulk Package is to be used only in a suitable work area such as a laminar flow hood (or an equivalent clean air compounding area). Once the closure is penetrated, the contents should be dispensed as soon as possible; the transfer of contents to suitable TPN admixture containers must be completed within 4 hours of closure penetration. The bag should be stored below 25°C (77°F) after the closure has been entered. Admixtures made using Intralipid 20% should be used promptly. See MIXING GUIDELINES AND LIMITATIONS section for admixture storage recommendations. Adult Patients The initial infusion rate of the nutrient admixture in adults should be 0.1 g fat/minute for the first 15 to 30 minutes of infusion. If no untoward reactions occur (see ADVERSE REACTIONS section), the infusion rate can be increased to 0.2 g fat/minute. For adults, the admixture should not contain more than 500 mL of Intralipid 20% on the first day of therapy. If the patient has no untoward reactions, the dose can be increased on the following day. The daily dosage should not exceed 2.5 g of fat/ kg of body weight (12.5 mL of Intralipid 20% per kg). Intralipid 20% should make up no more than 60% of the total caloric input to the patient. Maximum infusion rate should not exceed 0.1 g/kg/hr. Carbohydrate and a source of amino acids should comprise the remaining caloric input. Pediatric Patients The dosage for premature infants starts at 0.5 g fat/kg body weight/24 hours (2.5 mL Intralipid 20%) and may be increased in relation to the infant's ability to eliminate fat. The maximum recommended dosage is 3 g fat/kg/24 hours. Pediatric patients may be at risk for parenteral nutrition-associated liver disease (PNALD), also known as intestinal failure-associated liver disease (see WARNINGS section) when receiving Intralipid for durations exceeding two weeks. During intravenous administration of Intralipid 20%, perform liver tests to monitor for PNALD. The initial rate of infusion in older pediatric patients should be no more than 0.01 g fat/minute for the first 10 to 15 minutes. If no untoward reactions occur, the rate can be changed to permit infusion of 0.1 g of fat/kg/hour. The daily dosage should not exceed 3 g of fat/kg of body weight 3 . Intralipid (equivalent to 0.125 g/kg/hour) should make up no more than 60% of the total caloric input to the patient. Carbohydrate and a source of amino acids should comprise the remaining caloric input. Essential Fatty Acid Deficiency When Intralipid 20% is administered to correct essential fatty acid deficiency, eight to ten percent of the caloric input should be supplied by Intralipid 20% in order to provide adequate amounts of linoleic and linolenic acids. When EFAD occurs together with stress, the amount of Intralipid 20% needed to correct the deficiency may be increased. Administration See MIXING GUIDELINES AND LIMITATIONS section for information regarding mixing this fat emulsion with other parenteral fluids. INTRALIPID 20% (A 20% I.V. FAT EMULSION) PHARMACY BULK PACKAGE IS NOT INTENDED FOR DIRECT INFUSION. It must be infused as part of an admixture into a central or peripheral vein. The flow rate of the admixture should be controlled with an infusion pump. Use a 1.2 micron filter with admixtures containing Intralipid 20%. Filters of less than 1.2 micron pore size must not be used. Conventional administration sets and TPN pooling bags contain polyvinyl chloride (PVC) components that have DEHP (di(2- ethylhexyl) phthalate) as a plasticizer. Fat‑containing fluids such as Intralipid extract DEHP from these PVC components. Therefore it may be advisable to use a non‑DEHP administration set for infusing admixtures which contain Intralipid. Do not use any bag in which there appears to be an oiling out on the surface of the emulsion. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit.

Indications And Usage

INDICATIONS AND USAGE Intralipid ® 20% Pharmacy Bulk Package is indicated for use in a pharmacy admixture program for the preparation of three-in-one or total nutrition admixtures (TNAs) to provide a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and a source of essential fatty acids for prevention of EFAD.

Overdosage

OVERDOSAGE In the event of fat overload during therapy, stop the infusion of Intralipid 20% (A 20% I.V. Fat Emulsion) until visual inspection of the plasma, determination of triglyceride concentrations, or measurement of plasma light-scattering activity by nephelometry indicates the lipid has cleared. Re-evaluate the patient and institute appropriate corrective measures. See WARNINGS and PRECAUTIONS .

Clinical Pharmacology

CLINICAL PHARMACOLOGY Intralipid is metabolized and utilized as a source of energy causing an increase in heat production, decrease in respiratory quotient and increase in oxygen consumption. The infused fat particles are cleared from the blood stream in a manner thought to be comparable to the clearing of chylomicrons. Intralipid will prevent the biochemical lesions of essential fatty acid deficiency (EFAD) and correct the clinical manifestations of the EFAD syndrome.

Effective Time

20220721

Version

4

Spl Product Data Elements

Intralipid I.V. Fat Emulsion EGG PHOSPHOLIPIDS GLYCERIN SODIUM HYDROXIDE SOYBEAN OIL SOYBEAN OIL

Carcinogenesis And Mutagenesis And Impairment Of Fertility

Carcinogenesis, Mutagenesis, Impairment of Fertility: Studies with Intralipid have not been performed to evaluate carcinogenic potential, mutagenic potential, or effects on fertility.

Application Number

NDA020248

Brand Name

Intralipid

Generic Name

I.V. Fat Emulsion

Product Ndc

0338-0519

Product Type

HUMAN PRESCRIPTION DRUG

Route

INTRAVENOUS

Package Label Principal Display Panel

PACKAGE LABEL - PRINCIPAL DISPLAY - Intralipid 1000 mL Bag Label NDC 0338-0519-14 Intralipid ® 20% A 20% I.V. Fat Emulsion 1000 mL Pharmacy Bulk Package Not for Direct Infusion For Intravenous Use Rx only 20 pbp

Spl Unclassified Section

Pharmacy Bulk Package Not for Direct Infusion

Spl Unclassified Section Table

Pharmacy Bulk Package Not for Direct Infusion

Instructions For Use

Instruction for Use - Intralipid ® 20% Pharmacy Bulk Package Container 1. 1. The integrity indicator (Oxalert™) A should be inspected before removing the overwrap. If the indicator is black the overwrap is damaged and the product should be discarded. 2. 2. Remove the overwrap by tearing at the notch and pulling down along the container. The Oxalert sachet (A) and the oxygen absorber (B) should be discarded. Place the bag on a clean, flat surface or hang on a support hook. 3. 3. Break off the tamper-evident arrow flag from the blue infusion port. Use a compounding set with a diameter of 5.6 +/- 0.1 mm. Follow the instructions for use for the compounding set. 4. 4. Hold the base of the infusion port firmly and insert the spike straight through the center of the septum by rotating the wrist slightly if needed. NOTE: Assure that the spike is inserted straight into the port and not at an angle. Inspect the bag and contents for particulate matter in a well-lit environment prior to use. Discard the bag if there are any signs of discoloration or particulates. 5. 5. Hang the bag in the hanger cut and start transfer to the compounding bag Figure Figure Figure Figure Figure

Instructions For Use Table

1.

1. The integrity indicator (Oxalert™) A should be inspected before removing the overwrap. If the indicator is black the overwrap is damaged and the product should be discarded.
2.

2. Remove the overwrap by tearing at the notch and pulling down along the container. The Oxalert sachet (A) and the oxygen absorber (B) should be discarded. Place the bag on a clean, flat surface or hang on a support hook.
3.

3. Break off the tamper-evident arrow flag from the blue infusion port. Use a compounding set with a diameter of 5.6 +/- 0.1 mm. Follow the instructions for use for the compounding set.
4.

4. Hold the base of the infusion port firmly and insert the spike straight through the center of the septum by rotating the wrist slightly if needed. NOTE: Assure that the spike is inserted straight into the port and not at an angle. Inspect the bag and contents for particulate matter in a well-lit environment prior to use. Discard the bag if there are any signs of discoloration or particulates.
5.

5. Hang the bag in the hanger cut and start transfer to the compounding bag

References

REFERENCES Padley FB: “Major Vegetable Fats”, The Lipid Handbook (Gunstone FD, Harwood JL, Padley FB, eds.), Chapman and Hall Ltd., Cambridge, UK (1986), pp. 88-9. Levene MI, Wigglesworth JS, Desai R: Pulmonary fat accumulation after Intralipid infusion in the preterm infant. Lancet 1980; 2(8199):815-8. American Academy of Pediatrics: Use of intravenous fat emulsion in pediatric patients. Pediatrics 1981; 68:5(Nov) 738-43. (Rev May 2022) Manufactured for Baxter Healthcare Corporation Deerfield, IL 60015 USA Manufactured by Fresenius Kabi, Uppsala, Sweden Intralipid ® is a registered trademark of Fresenius Kabi AB.

Nursing Mothers

Nursing Mothers: Caution should be exercised when Intralipid is administered to a nursing woman.

Pediatric Use

Pediatric Use: See DOSAGE AND ADMINISTRATION .

Pregnancy

Pregnancy: Animal reproduction studies have not been conducted with Intralipid. It is also not known whether Intralipid can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. Intralipid should be given to a pregnant woman only if clearly needed.

How Supplied

HOW SUPPLIED Intralipid 20% is supplied as a sterile emulsion in 1000 mL Pharmacy Bulk Package. 1000 mL NDC 0338-0519-14 Intralipid 20% is also available in the following fill sizes: 100 mL: 0338-0519-58 250 mL: 0338-0519-09 500 mL: 0338 0519-13

Storage And Handling

STORAGE Intralipid 20% should not be stored above 25°C (77°F). Do not freeze Intralipid 20%. If accidentally frozen, discard the bag.

Boxed Warning

WARNINGS Deaths in preterm infants after infusion of intravenous fat emulsion have been reported in the medical literature 2 . Autopsy findings included intravascular fat accumulation in the lungs. Treatment of premature and low birth weight infants with intravenous fat emulsion must be based upon careful benefit-risk assessment. Strict adherence to the recommended total daily dose is mandatory; hourly infusion rate should be as slow as possible in each case and should not in any case exceed 1 g fat/kg in four hours. Premature and small for gestational age infants have poor clearance of intravenous fat emulsion and increased free fatty acid plasma levels following fat emulsion infusion; therefore, serious consideration must be given to administration of less than the maximum recommended doses in these patients in order to decrease the likelihood of intravenous fat overload. The infant's ability to eliminate the infused fat from the circulation must be carefully monitored (such as serum triglycerides and/or plasma free fatty acid levels). The lipemia must clear between daily infusions.

Precautions

PRECAUTIONS When Intralipid 20% is administered, the patient's capacity to eliminate the infused fat from the circulation must be monitored by use of an appropriate laboratory determination of serum triglycerides. Overdosage must be avoided. During intravenous administration with Intralipid 20%, perform liver tests to monitor for PNALD. If patients develop liver test abnormalities, consider discontinuation of Intralipid or dosage reduction. (See WARNINGS section). Frequent platelet counts should be done in neonatal patients receiving parenteral nutrition with Intralipid. Drug product contains no more than 25 mcg/L of aluminum. Carcinogenesis, Mutagenesis, Impairment of Fertility: Studies with Intralipid have not been performed to evaluate carcinogenic potential, mutagenic potential, or effects on fertility. Pregnancy: Animal reproduction studies have not been conducted with Intralipid. It is also not known whether Intralipid can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. Intralipid should be given to a pregnant woman only if clearly needed. Nursing Mothers: Caution should be exercised when Intralipid is administered to a nursing woman. Pediatric Use: See DOSAGE AND ADMINISTRATION .

Learning Zones

The Learning Zones are an educational resource for healthcare professionals that provide medical information on the epidemiology, pathophysiology and burden of disease, as well as diagnostic techniques and treatment regimens.

Disclaimer

The drug Prescribing Information (PI), including indications, contra-indications, interactions, etc, has been developed using the U.S. Food & Drug Administration (FDA) as a source (www.fda.gov).

Medthority offers the whole library of PI documents from the FDA. Medthority will not be held liable for explicit or implicit errors, or missing data.

Drugs appearing in this section are approved by the FDA. For regions outside of the United States, this content is for informational purposes only and may not be aligned with local regulatory approvals or guidance.